foxFlash is a powerful solution developed for professional chiptuners, calibration engineers and control unit (ECU and TCU) repair shops. foxFlash includes multi-method control unit programming for tuning ability. Designed by tuners, so you can get many of their support.
Update logs for foxflash software and hardware:
Foxflash V1.4.2 Software Firmware Version FW:D087
Firmware Version FW:D087 Update Contents:
1: Update firmware response speed
2: Rewrite can and kline working speed to improve reading and writing speed
2024-11-28 01:58:10 sofware version 1.4.2 firmware version FW:D087
2024-07-05 16:40:10 sofware version 1.4.2 firmware version FW:D086
2024-05-05 12:31:11 sofware version 1.4.t firmware version FW:D08A
2024-03-02 15:28:16 sofware version 1.4.b firmware version FW:D08B
2024-02-05 18:26:16 sofware version 1.4.d firmware version FW:D08D
2024-01-29 20:57:24 sofware version 1.4.1 firmware version FW:D085
2024-01-02 22:38:06 sofware version 1.4.0 firmware version FW:D084
2023-12-26 13:06:16 sofware version 1.3.9 firmware version FW:D083
2023-12-12 17:31:26 sofware version 1.3.8 firmware version FW:D082
2023-12-06 12:31:31 sofware version 1.3.7 firmware version FW:D081
2023-09-25 08:44:55 sofware version 1.3.6 firmware version FW:D080
2023-05-23 22:50:20 sofware version 1.3.5 firmware version FW:D079
2023-03-03 10:51:28 sofware version 1.3.4 firmware version FW:D078
2023-02-25 14:34:25 sofware version 1.3.t firmware version FW:D077
2023-02-25 14:34:25 sofware version 1.3.3 firmware version FW:D076
2023-01-20 17:11:55 sofware version 1.3.2 firmware version FW:D075
2023-01-03 20:11:17 sofware version 1.3.1 firmware version FW:D074
2022-11-02 22:18:12 sofware version 1.3.0 firmware version FW:D073
2022-10-22 22:18:12 sofware version 1.2.9 firmware version FW:D072
Support Five Modes and Full System
1: OBD mode:(read the data from Diagnostic port, you need remove the ecu or tcu from car or open the ecu box, just read everything from car, we also support obd reading, we supply original file from our server, you can read it via obd reading. )
2: BENCH mode: we also call it service mode, you can use this mode clone or backup all ecu data, read the internal flash and external flash and eeprom data, so you can save a lot of money for clone ecu and tcu , you also can clone tcu and chiptuning with this mode.
3: Jtag mode: open the ecu, and wire it or use ours adapter to connect ecu ways,some of denso ecu always need use this mode for reading and writing .
4: Boot mode: open the ecu and always can backup everything, read the flash and eeprom, you can save some ecu cause your obd write failed, or some others reason cause the ecu dead.
5: Full system: you can read and write by pinout for most of ecu and tcu.
6: BDM mode: some of the ecu need read and write in bdm mode, open the ecu and use ours adapter to connect it.
Support Multi-language
foxFlash supports multi-language: Italiano, English, Deutsch, Francais, Espanol, Polish, Portugues, Czech, Romana, Turkish.
Support Winols damaos
As we all know, winols damaos and A2L is very expensive ,we supply these to ours customer for free, so you can get it for chitpuning, dtc off, and so on.
Supported Control Units
We believe a control units list can be considered as a more safe approach to correctly target the overall tuning procedure due to the fact that a lot of brands offer identical car models & versions that share different Control Unit types.
Please note that foxFlash can help you select the right protocol with its auto-detection feature when identifying on most control units.
Support Vehicle Types:
AUTO
CAMION
TRATTORI
MOTO
MARINE
BIKE
CAMBI AUTOMATICI
Product Functions:
ECU clone
TCU clone
Chiptuning
Stage1-stage4
Vmax off
Adblue and SCR off
DPF OFF
Flaps OFF
popbangs
gearbox data to adjust LC
sport display
immo off
dpf off
dtc off
GPF/OPF Removal
DPF Removal
EGR Removal
DTC Removal
ADBlue Removal
HOT Start Fix
IMMO Removal
Readiness Calibration
Flaps / Swirl Removal
TVA Removal
Sport Displays Calibration
Cold Start Noise Reduction
Kickdown Deactivation
StartStop Disable
MAF Removal
Speed Limiter Removal
Torque Monitoring Disable
Burbles Activation
Popcorn Activation
EVAP Removal
Exhaust Flap Removal
SAP Removal
AGS Removal
BMS/BPCM
Lambda/O2 Removal
Launch Control
OBD Reading Protection
Boost Sensor Calibration
LC, AL and NLS for MED9.1
Checksum Fix
vmax, swirl off
restoring ECU or TCU factory setting service
VIN fix (EEPROM support checksum, so you can easily change VIN then write back )
BMW MINI BENCH BOOT READ&WRITE September 06, 2023
BMW Install Bosch MEVD17.2.7 Bench read/write
foxFlash is now able to perform the following operations:
Bench Read
Bench Write
Boot Read
Boot Write
On the following ECU reference:
Bosch MEVD17.2.7
BMW Bosch MEVD17.2.7 BENCH BOOT
Citroen Bosch MEVD17.2.7 BENCH BOOT
Mini Bosch MEVD17.2.7 BENCH BOOT
Peugeot Bosch MEVD17.2.7 BENCH BOOT
Update method: Click the download button in foxFlash manager till all file donwloading is completed.
Compatible Operating Systems:
Windows 7
Windows 8/8.1
Windows 10
Windows 11
Recommended Configuration:
CPU > 2.5 GHz (Intel i5, i7)
RAM > 4GB
64 bits
Note: Software can be activated on 6 computers.
Package Includes:
Hardware:
1pc x Master machine
1pc x Fox bench box
1pc x USB cable
1pc x Power adapter
1pc x Fox box store over 10 adpaters
1pc x Jtag and bdm cables
1pc x Pen
1pc x Notebook
1pc x Suitcase
1pc x Function cable for boot, bench, kline links .
1pc x Truck OBD cable
1pc x Car OBD cable
1pc x Paper box
1pc x Install guide
Software:
1pc x Main software
1pc x Technical Support
1pc x Login account for software and tools
1pc x PDF pacakges for connecting ecu and tcu
1pc x Join facebook group for support
1pc x Online chat support for use
Extra package according to users request after the user get the tool.
1pc x Tuner account
1pc x Helpdesk
1pc x WinOLS damaos, A2L
foxFlash OTB 1.0 expansion adapter release. November 20th, 2023
Product Introduction:
The OTB1.0 adapter is suitable for foxFlash extended application engine and transmission modules, and is also suitable for ACM and DCM modules. The OTB1.0 adapter can only be used with foxFlash Super ECU TCU Clone and Chiptuning Tool (SE166). If it is forced to be used with other devices, there will be a 75% chance of burning. Equipment damage due to this problem is not covered by after-sales service. This product is exclusive to the foxFlash Super ECU TCU Clone and Chiptuning Tool (SE166) and cannot be used with any other device.
Supported Functions:
1: Dual-channel high-speed CAN
2: Three-way BOOT
3: Dual VCC power supply
4: GPT encryption and decryption function
5: Adaptive resistance
6: Adaptive CNF signal adjustment
Product Design Purpose:
1: Ensure that foxFlash can be expanded to the OTB mode of BENCH PLUS in any OBD working mode.
2: Achieve high-speed reading and writing.
3: Ensure communication security and prevent the possibility of ECU brick due to voltage instability.
4: OTB reading and writing in OBD offline mode.
5: ECM, TCM, ACM, DCM direct desktop mode reading and writing.
6: Improve the reading and writing speed of some OBD drivers.
Supported Models and List:
Search for "OTB" in the official website list, and you can use it if there is "OTB" in the list.
https://www.dfb-technology.com/driver-list.html
Log in to the browser at the above address and search for "OTB" to view the models that support OTB.
If the query mode cannot be displayed when opened, please clear the browser cache and reopen the website.
Package Includes:
1pc x OTB 1.0 expander
1 set x OTB 1.0 conversion cables
1pc x Paper Box