[Full Adapters for foxFlash] OTB 1.0 Expansion Adapter plus GPT Boot AD Programming Adapter and LED BDM Frame and ECU Open Cover and (Free Gifts)

[Full Adapters for foxFlash] OTB 1.0 Expansion Adapter plus GPT Boot AD Programming Adapter and LED BDM Frame and ECU Open Cover and (Free Gifts)

Package Including:

• 1 Set * OTB 1.0 Expansion Adapter
• 1 Set * GPT Boot AD Programming Adapter
• 1 Set *  LED BDM Frame With 4 Probes
• 4pcs * ECU Uncover Tool 
•  
• Get free gifts
• 1 pair*Foxflash gloves
  1 pc*Toyota/Lexus Adapter

foxFlash OTB 1.0 expansion adapter

 

Product Introduction:

The OTB1.0 adapter is suitable for foxFlash extended application engine and transmission modules, and is also suitable for ACM and DCM modules. The OTB1.0 adapter can only be used with foxFlash Super ECU TCU Clone and Chiptuning Tool (SE166). If it is forced to be used with other devices, there will be a 75% chance of burning. Equipment damage due to this problem is not covered by after-sales service. This product is exclusive to the foxFlash Super ECU TCU Clone and Chiptuning Tool (SE166) and cannot be used with any other device.

Supported Functions:
 

1: Dual-channel high-speed CAN

2: Three-way BOOT

3: Dual VCC power supply

4: GPT encryption and decryption function

5: Adaptive resistance

6: Adaptive CNF signal adjustment

Product Design Purpose:
 

1: Ensure that foxFlash can be expanded to the OTB mode of BENCH PLUS in any OBD working mode.

2: Achieve high-speed reading and writing.

3: Ensure communication security and prevent the possibility of ECU brick due to voltage instability.

4: OTB reading and writing in OBD offline mode.

5: ECM, TCM, ACM, DCM direct desktop mode reading and writing.

6: Improve the reading and writing speed of some OBD drivers.

Supported Models and List:

https://www.dfb-technology.com/driver-list.html

Log in to the browser at the above address and search for "OTB" to view the models that support OTB.

If the query mode cannot be displayed when opened, please clear the browser cache and reopen the website.

Package Includes:
 

1pc x OTB 1.0 expander

1 set x OTB 1.0 conversion cables

1pc x Paper Box


GODIAG ECU GPT Boot AD Programming Adapter for Foxflash PCMTuner Openport Godiag GT100

Works with Foxflash, PCMTuner, Godiag GT100, Openport!

Product Introduction:




Product Features:

1. ECU dedicated connection terminal.
2. Support manual ignition power control
3. The ECU interface cable is labeled
4. Support ECU conversion to OBD2 mode to read and write data
5. Support RESET, BOOT, CNF1, GPT1, GPT2, 5V, 3.3V, VPP, GND.
6. Support PCMFlash automatic control of ignition power supply
7. Support ECU opening BOOT method to read and write data
8. CANbus is equipped with a switch to freely select the 120Ω resistor
9. Support GPT to read and write data without disassembling the ECU.
10. Equipped with BOOT resistance board connecting cable [anti-lost resistor design]




Product Functions:

• Diagnostic function supports standard OBD2 protocol equipment.
• Supports ECU reading and writing data, and supports J2534 devices.
• Only Scanmatik 2 PRO for PCMflash allows to form GPT1, GPT2 signals necessary to work with Module 71.
• Other devices Scanmatik OpenPort 2.0, Mongoose JLR, MongoosePro JLR,
• Teradyne GNA600 (VCM 1), Mazda VCM 2 supports OBD2 or BOOT 53 mode to read and write ECU data.

Connection Method of GODIAG ECU GPT Boot AD programming adapter, J2534 device and PCMFlash dongle software.

Some knowleage for reference

1. Users who use pcmflash software:
(1) Used with Scanmatik 2 PRO, pcmtuner, and ktmflash devices. These devices come with dongles. Customers can buy a so676 and connect it directly (obd, gpt bench, and boot are all acceptable)
We have encountered pcmtuner customers who want to read the ECU of Simos 8.6. This ECU needs to be removed from the car, and then the jumper is connected to do the ECU initialization. After initialization, the ECU needs to be installed in the car, and then the OBD connection is used to read the data.
If the ECU and the car are not in the same place, it will be inconvenient. Using so676 to convert OBD, the ECU can read data without loading the car, which is convenient and time-saving.
(2) To cooperate with j2534 equipment, such as vxdiag vcx se, openport 2.0, vcm2 of the original solution, jlr mongoose, se157-s is required (supports obd, boot)
2. Use other ECU programming devices (supporting OBD connection), such as kess v2, fgtech v54, directly connected to SO676
3. When using decoder equipment, the customer does not operate it in the car. When the ECU is removed, connect the decompression code for diagnosis, such as x431 autel xtool and other equipment.
4. Customers who are good at it can use it freely

J2534 device	connection method	PCMFlash dongle software	advantages
			easy, convenient and save money
			Convenient to observe communication status, current and voltage and other working status

Product Comparison:
 

Items
GPT	√	√	√	√
BOOT	√	√	√	√
CNF1	√	X	X	X
Compatible with J2534 devices	√	√	X	X
BOOT resistance board	√	X	X	X
Dedicated ECU terminal	√	X	X	X
Power ignition manual /automatic switch	√	√	X	X
CANbus freely select the 120Ω	√	Fixed 120Ω	X	Fixed 120Ω
5V 3.3V GND CNF1	√	X	X	X

 
Package Includes:

1pc x GODIAG ECU GPT Boot AD Programming Adapter

---

LED BDM Frame With 4 Probes Mesh For Kess Dimsport K-TAG

BDM FRAME with Adapters Set, made from hight quality stainless steel,can use on BDM100 programmer,KESS V2, Ktag, Fgtech,CMD,ETC.

LED BDM Frame with Mesh and 4 Probe Pens for FGTECH BDM100 KESS KTAG K-TAG ECU Programmer Tool

Tip:
No PCB in this package! LED works for 12V. After you connect with the probe, disconnect 12V battery for LED, it will work.The probe pin is adjustable.
 
LED BDM Frame Description:
 
1. It consists of a Acrylic board, Mesh and 4 Probe Pens.
2. LED works for 12V. After you connect with the probe, disconnect 12V battery for LED, it will work.The probe pin is adjustable.
3. It is the best bracket for ECU Update/ECU Brush and Write/ECM Modified and programming/Probe holder/Dimsport aids.
4. It works with KESS, KTAG, FGTECH, BDM100, KTM100, CMD, DIMSPORT AIDS, and othe ECU chip tuning tools.
5. It is easy to use, much better than the old bdm frame.

Package List:

1pc x BDM frame
1pc x Bdm frame with LED (Made by a Acrylic board)
4pc x Cable for Probe
4pc x Probe
Note: No PCB Board in the Package
HQ Stainless steel BDM Frame for BDM Programmer / CMD 100