Dimsport New Trasdata Hardware Bench & Open ECU / TCU Cloning / Reading / Programming

Dimsport New Trasdata Hardware Bench & Open ECU / TCU Cloning / Reading / Programming

Product Introduction:
 
The list of microprocessors (CPU) now includes:
 
Freescale/ST MPC56xx SPC56x, Freescale/ST SPC5777C, Freescale SPC577M
Infineon Tricore, Infineon Tricore Aurix TC2XX
Mitsubishi MH72xx, MH82xx
Motorola HC12, MC68xxx, MPC5xx, MPC55xx, 
Nec 76F00xx
Renesas M32R, SH705x, SH725xx 
ST Microelectronics ST10xxx

Product Features:
 
Few Easy Steps to Get to the Core
New Trasdata allows the reading and programming of the whole content of the ECU: microprocessor (CPU), flash Eprom and serial Eeprom. A wide variety of operations is therefore supported: after the initial reading, it is always possible to retrieve the original ECU content even in the case of blocking (back-up). This tool also perform autonomous checksum recalculations to ensure normal engine working conditions after the modification. The operations can be performed without any physical soldering/desoldering intervention: a metal positioning frame provided with specific terminal adapters create the connection between the ECU board and the tool. In specific cases, it is possible to perform reading/writing operations without even opening the ECU.
 
A MUST-HAVE Tool for Reading/Writing BENCH Operating.
Specific functions conceived for the tuning field like the mentioned reading of the whole ECU firmware, or the self-identification of the engine maps and important additional parameters (even if located in different components of the ECU), confirm New Trasdata as the leading tool available today on the market for reading and programming bench operations.

Dimsport New Trasdata Bench & Open ECU / TCU Cloning / Reading / Programming Features:
 
ECU and TCU cloning:
The New Trasdata Bench can clone ECUs and TCUs using a variety of methods, including OBD, BDM, BOOT, JTAG, and AUD.
 
ECU and TCU reading:
The tool can read the data stored on an ECU or TCU, including the software and data files.
 
ECU and TCU programming:
The New Trasdata Bench can be used to program ECUs and TCUs with new data, including software updates, customizations, and modifications.
 
Automatic checksum correction: The tool automatically corrects the checksum when programming the ECU or TCU, ensuring that the unit functions properly.
 
Multiple protocols: The New Trasdata Bench supports a wide range of protocols, including CAN, K-LINE, J1850, and PWM.
 
Multi-brand and multi-language support: The tool supports multiple brands of vehicles and can be used with a variety of languages.
 
Real-time data display: The New Trasdata Bench can display real-time data from the ECU or TCU, including sensor data, fault codes, and other important information.
 
Easy-to-use software: The software used with the tool is designed to be easy to use and offers a variety of features, including automatic updates and backup options.
 
Trasdata Dimsport JTAG
A wide range of JTAG developments enhances now the range of BDM and BOOT applications previously released. The list of microprocessors (CPU) now includes:
 
Motorola MPC5xx (BDM mode)
Motorola MC68xxx (BDM mode)
Motorola MPC55xx (JTAG mode)
Renesas SH705x (AUD/BOOT mode)
Mitsubishi MH72xx/MH82xx (BOOT mode)
Infineon Tricore (BOOT mode)
ST Microelectronics ST10xxx (BOOT mode)
Motorola HC12 (BDM mode)
Renesas M32R (BOOT mode) 

Package includes:
 
1pc x NEW TRASDATA Cable OBDII K/CAN2.0 (F34NTA14)
1pc x FLAT CABLE IDC26-10 (F34NTF01)
1pc x FLAT CABLE IDC26-14 (F34NTF02)
1pc x FLAT CABLE IDC26-16 (F34NTF03)
1pc x FLAT CABLE IDC26-26 (F34NTF04)
2pcs x FLAT CABLES WITH FREE COLORED WIRES BDM IDC26-10 (F34NTF51)
2pcs x FLAT CABLES WITH FREE COLORED WIRES JAG IDC26-16 (F34NTF53)
2pcs x FLAT CABLES WITH FREE COLORED WIRES IDC26-26 (F34NTF54)
1pc x New Trasdata DB15 Universal Cable(F32GN037-D)
1pc x NEW GENIUS Cablaggio Adapter DB15 per DIMA(F32GN038)
1pc x New Trasdata Adapter E-GPT(F34NTA22)
1pc x Terminal Wires Long Version 60cm(F32GN037-D-S1)
1pc x Terminal Wires Short Version 20cm (F32GN037-D-S2)
1pc x Wiring Interface for F34NTA22 e-GPT System (F34NTA22-S1)
1pc x Terminal Wires Short Version 20cm (F34NTA22-S3)
1pc x Micro Terminal Wires Long Version 60cm(F34NTA22-S5)
1pc x Micro Terminal Wires Short Version 20cm(F34NTA22-S6)
1pc x EDC7 Adapter for NTA22(F34NTA22-S7)
1pc x EDC7 Adapter for NTA22(F34NTA22-S8)
1pc x Coloured Loose Flat Wires for CAN&GPT Communications(F34NTA15-B)
1pc x Colored Loose Flat Wires for SSM communications VAG SIEMENS(F34NTA18-B)
1pc x NEWTRASDATA ECU connection(F34NT-S1)
1pc x NG/NT Cable Battery Power Supply(F32GN003)
3pcs x INTERNATIONAL PLUGS
1pc x Charger
1pc x USB Cable