Latest price:€699.00$726.96£600.79€634.00$659.36£544.929% off
Item No. SE166
Free Shipping
A complete tool for reading and programming engine control units via OBD and via the Boot mode and Jtag systems. Full system and Bench mode also available. A unique solution for the mechatronics.TCU package for automatic transmissions available.
Can this tool clone Continental MSD85.0 ECU for BMW F Series without opening?
Replied byBellaon Jun 2, 2023
Hi sir
How are you?
You can try for need obd or boot to do it
Any more ideas please let us know
Bella
byMr.terry coburnon Jun 2, 2023
MG1 Bosch BMW F Series unlock also possible for tuning via obd?
Replied byBellaon Jun 2, 2023
Hi yes my friend
please try for bench unlock
Thanks
byMr.Stephen Dareon Jun 2, 2023
Can i read the map via obd 2 modify and write it back via obd 2? Which module do i need to buy? I attached a photo of my ecu
Replied byBellaon Jun 2, 2023
Hello, it is ok if this ecu is not encrypted
This device can do
Thanks
byMr.Mike Clapperon May 24, 2023
I wanted to ask if the program is constantly updated with the new ecu?
Replied byBellaon May 24, 2023
Yes sure
This software is update now and then
You can get the latest software with the new ecu
now our latest update information is like this:
May can't get any better as we release a new exclusive protocol today! In this update, you'll find the BENCH protocol for Isuzu EDC17C83.
R/W time: ~6 minutes at first programming, then ~ 30s.
ATTENTION: Some of the latest vehicles might have a secure gateway.
Update method: Run the foxFlash Manager software, and click the download button till all is done.
byMr.Mohammad Abughazlehon May 24, 2023
Can fox flash work in ford fusion 2017 pcm hybrid continental ems 2208
Replied byBellaon May 24, 2023
Hi friend
Thanks for your information
NO it can not do
please notice
Any mroe ideas please add my whatsapp:+86 15271813909
Bella
byMr.MACon May 23, 2023
Hi FoxFlash can do clone PCR2.1
Replied byBellaon May 24, 2023
Hi my friend
Thanks for your message
Yes foxflash can do this model
You can try and any more ideas please let us know
Bella
byMr.Dan Luverduon May 22, 2023
The Bosch E 77 do you have a pan out to program this PCM using foxflash can you send that PCM pin out to me rivet 3.6 engine gasoline
byMr.keith widdowsonon May 22, 2023
if you could tell me if the fox Flash will remove security on the Dodge 2015 and up computers if so can I tune it with HP tuners afterwards
Replied byBellaon May 22, 2023
Hi dear friend
Yes it can do
It support unlock function
byMr.Tom Largeon May 22, 2023
if foxflash can do clone ecu valeo V50 bench mode
Replied byBellaon May 22, 2023
Hi dear friend
No it can not clone it
It can read and write
please notice this
Bella
byMr.john diverson May 22, 2023
after reading the batch from the controller, can I do the dtc off myself or do I have to send the batch is it possible to do the dtc off using the foxflash software or do I have to use an external program
Replied byBellaon May 22, 2023
Hi dear friend
yes it can do
but requires additional software
byMr.adrian millson May 22, 2023
Can read dcu17pc43 ford transit adblue module?
Replied byBellaon May 22, 2023
Yes sure please try
any ideas please contact us sales@foxflash.co.uk
byMr.Stephen Hooperon May 22, 2023
I have one pcm wih Mpc 5777 . Is possible to read/write this pcm ??
Pcm : Bosch , used in Chevrolet Tracker, Onix 2021.... Pcm model : E64
Replied byBellaon May 22, 2023
Hi Yes sure
It can do and you can try
byMr.Fraser Smithon May 22, 2023
Mercedes c63amg 7g tronic Tcu continental tremic VGS 2NAG2 C63 amg w205 (2016) Can your tool read and write the tcu? I would like to tune it
Replied byBellaon May 22, 2023
Hi thanks for your message
I have asked to the technician and he says all of this can do
Do not worry about this
You can try for it
Any more ideas please feel free to contact us
Thanks
Bella
byMr.Dinoon May 22, 2023
Hi foxflash and complete with ht prof?
Replied byBellaon May 22, 2023
Hi Thanks for your message
Actually we don't need this thing
This is all pirated charcoal
Our equipment has covered all ht protocols
Bella
byMr.Malcolm Reeson May 5, 2023
Can I use your tool to read eeprom on bench from EDC7UC31. Also do you support EEM2 Sisu?
Replied byBellaon May 5, 2023
edc7 uc31 can
eem2 no encryption can
Bella
byMr.Shaun flowerson May 5, 2023
Does it support Bosch ME17.2.42 (BMS-O) for BMW Motorrad R/W over OBD or Bench, Boot Mode?
Replied byBellaon May 5, 2023
Yes please try for bench
byMr.Michalon May 5, 2023
program off a Altera EPM2210F256 using the FoxFlash tool
Replied byBellaon May 5, 2023
Please tell us the detailed ECU model
byMr.Haider Arshadon May 5, 2023
CAN FOXFLASH RESET OR CLEAR EGS OR ISN ON BMW 8HP TRANSMITIONS
Replied byBellaon May 5, 2023
Hi sir
no you have to read out then use others software reset it ,
foxflash is a read and write tool
byMr.antony brownon May 5, 2023
Can Foxflash clone Range Rover PCM Kk62-14c568-ab?
Replied byBellaon May 5, 2023
Hi sir
yes, it can if no encrypt
byMr.Martinon May 5, 2023
foxflash, does this support ecu cloning for mini ecu MEVD 1723?